HKP feed-through press for door production – 1 man operation
The automation level of this machine allows that only one man can operate the machine. The input of the panel into the glue spreader is manual. On the driven roller disc way the boards are tranported to the material slide. With this slide, the board which is glued on both sides, is transported over the previous veneer onto the lay-out table. Now, the operator turns the lower veneer in the right position and slides the panel down. Subsequently, the bar of the material slide is raised pneumatically and returns to the starting position.
With help of the veneer-carriage the user lays the top veneer on the board. The only thing that is left is to moisten the top veneer according to the different types of veneer. Then the veneer is transported to the press. The belt-shake device avoids that the workpieces sticks on the upper heating plate. The conveyor belt then transports the finished door plank onto the outfeed roller conveyor. With a vacuum lifter the door is placed onto the load to cool down.
- 1-man operation
- Additional power-saving equipment